安徽一对一全陪导游-安徽一对一全陪导游

滁州附近有没有服务

Current location: Honglin machinery > News Center > Conveyor article >
Conveyor article

How to replace the belt of belt bucket elevator?

Number of visits: Release date: 2020-08-07 11:28 source: admin

With the gradual development of the industry, belt bucket elevator is used for material transportation in many industries, such as food, mechanical parts, chemical industry, etc., which need to use belt bucket elevator to transport materials, but the accessories of the elevator will also be damaged. Today, I would like to share with you the method of belt replacement of belt bucket elevator!

How to replace the belt of belt bucket elevator?

1. Firstly, transport the new belt to the tail of the belt bucket elevator, open the tail observation ports on both sides of the belt bucket elevator, and disconnect the old belt from the tail pulley of the belt bucket elevator through one of the tail observation ports;

2. Connect the prepared new belt of the belt bucket elevator with the corresponding broken end of the old belt at the tail observation port of the elevator, and then start turning at the first wheel of the belt bucket elevator until the old belt is all output from the other tail observation port, and then disconnect the connection between the new belt and the old belt;

3. Then connect the two broken ends of the new belt. The beneficial effect of the invention is: the belt of the belt bucket elevator is replaced by the method of manual turning, the process of removing the shield at the first wheel of the belt bucket elevator is avoided, the whole process is simple and easy to operate, the stability coefficient is high, the replacement time is short, and the normal production is not affected.

 Real shot of belt bucket elevator

Working principle of belt bucket elevator:

The material can be lifted to the top with the conveyor belt and turned down around the top pulley. The transmission belt of the belt bucket elevator is rubber belt, which is generally installed on the lower or lower drive drum. The belt bucket elevator is generally equipped with a shell to prevent the dust from flying in the elevator. The belt bucket elevator is mainly used to lift materials from low to high places. The supplied materials are provided by the vibration table and will be put into the hopper, and the machine will automatically and continuously transport upward!

 Real shot of belt bucket elevator

Installation of belt or chain of belt bucket elevator:

Bucket elevator belt or chain installation method is very simple, but mainly how to better extend the service life of equipment components, reduce the maintenance and replacement of these parts, in order to better reduce the use and maintenance costs. The correct operation is also an important aspect. The operation of the bucket elevator needs careful maintenance and maintenance. If it is necessary to stop the machine in the process of use, stop the machine after the material in the hopper is transported.

The replacement of conveyor belt or chain of bucket elevator is an inevitable problem for users. Only by finding the right method can the replacement be carried out quickly, without affecting the use of equipment and reducing the loss caused by equipment shutdown. The bucket elevator takes the conveyor belt or chain as the traction part and adds hopper to complete the material lifting operation. Once the conveyor belt or chain fracture and other problems occur, the user needs to replace it. Here we summarize the installation method to help users complete the installation work faster and save maintenance time.



Address: high tech Development Zone, Zhengzhou City, Henan Province, manager Xie: 13503839055 13733186581 Xie Gong: 15136413311

Tel: 0371-56783311 online QQ: 1105086557 email: [email protected] Map website

Copyright? 2009-2018 yuicp Bei No. 13012511-22 Engine technology network